|
............................................
Want more information on
great Sewer Equipment
products?
Feel free to contact us.
|
|
|
Surface
Hung Manhole Roller And Yoke
Assembly of this roller and yoke allows the operator to stay
out of the manhole and provide proper adjustment of this assembly
so the bucket can travel easily around the roller into the
sewer line to be cleaned.
|
|
Part
No.
|
Size
|
Description
|
|
71520-00-Z
|
8"
|
Surface
Hung Manhole Roller & Yoke
|
|
71521-00-Z
|
12"
|
Surface
Hung Manhole Roller & Yoke
|
|
71522-00-Z
|
15"
|
Surface
Hung Manhole Roller & Yoke
|
|
71523-00-Z
|
15"
|
Surface
Hung Manhole Roller & Yoke with Wide Flange for
Large Buckets
|
|
| |
|
Surface
Hung Platform
Mounted at top side and held in position by the adjustable
legs of the bucket machine, this assembly supports the guide
pipe and surface of the manhole roller in the manhole.
|
|
Part
No.
|
Description
|
|
90000-00-Z
|
Surface
Hung Platform with Chain Vise
|
|
| |
|
Chain
Vise Holder Complete
This assembly holds the 2" guide pipe in position.
|
|
Part
No.
|
Description
|
|
90974-00-F
|
Chain
Vise Complete for Platform Assembly
|
|
| |
|
Double
Squeegee
Double Squeegee is designed to be used as a final finishing
tool. Soapy lines with large deposits of grease and detergent
are where these squeegees are most effective.
|
|
Part
No.
|
Size
|
Description
|
|
72109-00-Z
|
6"
|
Double
Squeegee
|
|
72107-00-Z
|
8"
|
Double
Squeegee
|
|
72110-00-Z
|
10"
|
Double
Squeegee
|
|
72108-00-Z
|
12"
|
Double
Squeegee
|
|
72111-00-Z
|
14"
|
Double
Squeegee
|
|
72112-00-Z
|
15"
|
Double
Squeegee
|
|
72113-00-Z
|
16"
|
Double
Squeegee
|
|
72114-00-Z
|
18"
|
Double
Squeegee
|
|
72115-00-Z
|
21"
|
Double
Squeegee
|
|
72116-00-Z
|
24"
|
Double
Squeegee
|
|
| |
|
Double
Squeegee With Swivel
Finishing tool to be used in lines where there are curves
or turns.
|
|
Part
No.
|
Size
|
Description
|
|
72203-00-Z
|
6"
|
Double
Squeegee With Swivel
|
|
72204-00-Z
|
8"
|
Double
Squeegee With Swivel
|
|
72205-00-Z
|
10"
|
Double
Squeegee With Swivel
|
|
72206-00-Z
|
12"
|
Double
Squeegee With Swivel
|
|
72207-00-Z
|
15"
|
Double
Squeegee With Swivel
|
|
72208-00-Z
|
16"
|
Double
Squeegee With Swivel
|
|
72209-00-Z
|
18"
|
Double
Squeegee With Swivel
|
|
72210-00-Z
|
20"
|
Double
Squeegee With Swivel
|
|
72211-00-Z
|
24"
|
Double
Squeegee With Swivel
|
|
72212-00-Z
|
30"
|
Double
Squeegee With Swivel
|
|
72213-00-Z
|
36"
|
Double
Squeegee With Swivel
|
|
| |
|
Triple
Squeegee
Each Triple Squeegee segment has holes drilled into the assembly
so that water can pass through and aid in the removal of grease
and sludge deposits.
|
|
Part
No.
|
Size
|
Description
|
|
72121-00-Z
|
6"
|
Triple
Squeegee
|
|
72122-00-Z
|
8"
|
Triple
Squeegee
|
|
72123-00-Z
|
10"
|
Triple
Squeegee
|
|
72124-00-Z
|
12"
|
Triple
Squeegee
|
|
72125-00-Z
|
14"
|
Triple
Squeegee
|
|
72126-00-Z
|
15"
|
Triple
Squeegee
|
|
72127-00-Z
|
16"
|
Triple
Squeegee
|
|
72128-00-Z
|
18"
|
Triple
Squeegee
|
|
72129-00-Z
|
21"
|
Triple
Squeegee
|
|
72130-00-Z
|
24"
|
Triple
Squeegee
|
|
| Call
factory for replacement of rubber disc for squeegees. |
|
Adjustable
Slant Jack
To be used at the pull in manhole in lieu of a surface hung
manhole roller assembly. The jack should be positioned at
an angle so that the cable will roll around the roller and
not come in contact with the manhole ring. Make certain this
assembly is locked securely in place and in many cases may
require chipping out a section of the manhole so it doesn't
slide out of position.
|
|
Part
No.
|
Description
|
|
80095-00-F
|
Adjustable
Slant Jack
|
|
| |
|
Heavy
Duty Slant Jack With Wide Roller
A double supported roller assembly makes this a more cumbersome
slant jack to handle, but when put in the manhole, it will
allow the user to put greater pulls on a bucket as opposed
to the limitations of the adjustable slant jack. This jack
is adjustable for various manhole lengths.
|
|
Part
No.
|
Description
|
|
80210-00-F
|
Heavy
Duty Slant Jack With Wide Roller
|
|
| |
|
Expandable
Root Cutter
Very effective root cutting tool. May be adjusted to clean
pipes from 8 inches to 30 inches in diameter. It is suggested
that the line be cleaned with buckets first and then utilize
this tool to remove the roots and debris located at the
pipe extremities. A tool like this allows the operator to
collapse the root cutter for easy insertion at the manhole
entrance, then he can adjust it to a larger size (up to
30 inches) to properly clean the sewer line so that most
of the debris is removed.
|
|
Part
No.
|
Size
|
Description
|
|
71788-00-Z
|
8"
- 30"
|
Expandable
Root Cutter
|
|
| |
|
