 |
|
|
|
|
|
|
|
|
|
|
|
Model
800-H Truck Jet
|
|
Truck
Mounted High Velocity Sewer Cleaning Machine With
|
|
- Hydrostatic Drive -
|
| |
•Provides
heavy duty cleaning and maintenance of sanitary and storm
sewers
•Specially designed hydraulic pump is direct coupled
to truck chassisengine and powers water pump. Hydrostatic
drive eliminates the need for auxiliary engines and
belts/pulleys
•Engine noise is limited to truck engine and dramatically
decreased at operators station
•Standard water recirculation system eliminates problems
at pump, hose or tank freezing, even while truck is
in motion |
| |
|
 |
Hydrostatic
Drive:
Eliminates the additional maintenance work needed for auxiliary
engine and belt/pully drive systems. A unique hydraulic pump,
direct coupled to the truck's drive shaft or World Transmission,
powers a rear mounted hydraulic motor which drives the jetter's
water pump. Overall maintenance is minimized while allowing
for full-time water circulation during cold weather, even when
the truck is traveling at highway speeds. |
Water Pumps:
The ability to remove sewer debris such as sand, sludge, silt,
hardened grease, stone, and pesky roots is supplied by our high
pressure water pumps with capabilities of producing from 18-100
gallons per minute (GPM) while maintaining up to 4000PSI. |
Water Tanks:
Proven construction techniques and the latest technological
advances are utilized in the construction of the Model 800-H
water tanks. The most popular version is the Duraprolene Water
Tank with 1/2" thick walls, full "top to bottom"
baffle, and U.V. stabilization. |
Hose Reel:
Heavy duty hose reels are available with capacities of 600'-1200'
and are designed to withstand maximum PSI working pressure without
distortion. |
Rear Pump Compartment:
The Model 800-H operating components located in the rear are
protected by a 14 gauge, heavy duty, bolted body which eliminates
both exposure to the elements as well as vandalism damage. Vertically
hinged access doors allow superb maintenance accessibility.
Lockable steel or aluminum boxes are available. An optional
rear canopy door insures security of the control panel components
as well as protecting operator from exposure to weather. The
"bolted" rear compartment panels can be easily removed
for improved access to major components. |
Standard Accessories:
In addition to the major components, every Model 800-H is supplied
with a complete set of standard accessories including, but not
limited to: hardened steel nozzles, nozzle extension, protective
hose guide, fill system, fill hose, tank ladder, compartment
ladder, recirculation system, control panel, sight gauge, low
water warning light, ICC lights, hose level wind, and wash down
gun with 25' extension hose. |
Distributor Support:
Sewer Equipment Company Of America equipment is serviced and
supported by America's most knowledgeable team of technicians
and mechanics. Please call our toll-free number to contact your
local distributor. |
| |
|
Roll-Up Doors
Deluxe roll-up doors, eliminating the dangers inherent with pullout
or fold-out doors which extend into traffic. Standard installation
is a header/counterbalance design which enables the door to "coil
up" into a header. There are no rollers or cable to maintain.
This door is virtually maintenance free.
|
|
|
Roll-Out
Root Cutter Maintenance Box
This sealed, epoxy coated oil reservoir is equipped with a hand pump
which forces hydraulic oil into the root cutter which is stored inside.
This system keeps Root Cutters lubricated and minimizes the mess by
sealing the Root Cutter and oil in the storage box.
|
|
|
Hydraulic Root Cutters:
The overall productivity of the 800-H can be enhanced with the use
of a hydraulic root cutter. Various models are available from the
heavy duty WJ-49R "Ring Style" Root Cutter", the Patriot
Root Cutter, or the more sleek and aerodynamic "Mini-Root
Cutter". Blockage busting, grease cutting, and root cutting jobs
are simplified and completed faster with the ring style or mini-root
cutter. Blade sizes ranging from 3" to 24" as well as skids
are available.
Specialty Nozzles:
The Model 800-H can be equipped with any of the Sewer Equipment Company
Of America specialty nozzles such as the "
Little Thunder Nozzle ". This highly specialized, weighted
nozzle is designed for larger diameter lines with excessive deposits
of sand, silt, and heavy debris. |
|
|
>Back To Top |
|
|
|
|
Check
Out These "Must Have" Accessories For Your Jetting Equipment
|
|
Patriot
Root Cutter
|
Diamond
Tap Cutter
|
Hose
|
Pumps
|
|
|
|
|
|
|
|
|
